NEW SUNLIGHT STONE COATED STEEL ROOFING TILES beautiful depends on the following points


1 pastel uniform, not dazzling and impressive bright , preferably matt .


(2) between the tile and the tile is no chromatic aberration. Dazzling bright colors , color can be selected at random , there are 12 kinds of colors, either customers to choose their favorite color . Never ending , each tile color uniform, no deeper than the other , but no piebald , vivid three-dimensional effect .


3.Color durable wind and sun, rain does not fade.


4 W -shaped groove pattern soft, sensuous .


5 precise size , lap tight , paving small error. Good stone coated steel roofing tiles, paved ramp anyway after all linear , like printing as neat , very beautiful. Small plants are modeled based, large size error or warping , often can not paved . Who can not use this tile paved . For example, only 2mm wide tile errors , 100 watts row , it will be worse 20 cm , more than half a watt are wide , tile becomes naturally inclined , can not shop Sarkozy . Such as tile warpage, shop at a large gap , it will not beautiful.


Selection of high quality is the cornerstone of high- quality real estate , in particular the appearance of real estate , and in the external selection , as the housing cap, wind, sun , rain , tiles bear the brunt , but also prone to common problems concentrated land Therefore, the choice of tiles to be cautious.edited by china stone coated steel roofing tiles

china manufacturers of Cultured stone veneer natural advantages

Buy cultured stone still depends on the manufacturer and brand, culture stone texture inherently attractive, whether it is from the tactile texture or from other natural form, feel only the most natural culture stone have the feeling of nature, by the people favorite. At the same time regardless of culture stone decoration is applied to exterior or interior decoration always a different kind of flavor. Following is a brief cultured stone veneer concentration levels:

​
     First, Artificial Stone Veneer  often used outside the wall, with culture stone renovation can give a countryside feeling, more simple and natural, natural pursuits of home.
     Second, cultured stone can also be used as interior decoration, interior large area of use of cultural stone decoration, giving a retro feeling strange.
     Third, cultured stone as TV with King or other local decorative, appear more three-dimensional space.edited by china stone veneer manufacturers Interior/Exterior/Fireplace

American Stone Market Profile

 

United States a total population of 215 million, land area 9,363,276 square kilometers. Because the United States land area, solid domestic economic system, making the U.S. construction industry has remained at a very high level of development, thus fundamentally decorative stone and the world of international trade integration process.

 

 

   In addition to the characteristics of the U.S. economy and territory outside the U.S. market as well as its unique place: Any U.S. citizen is very easy to apply for credit, and people outside of the real needs of consumer desire is likely to be aroused. Because of these factors, the United States is considered to be a very marketable market, especially for a variety of stone products. However, the U.S. per capita consumption of decorative stone, but also among the world's low countries. Therefore, the United States, stone coated steel roof  tiles market is still tremendous potential. However, the U.S. market is very complex and stone, and because they are extremely active. Only in the 1990-1999 decade, the United States had experienced several ups and downs of the market changes.

 

Nineties of the U.S. market over the previous two decades has fundamentally changed - in the development of large-scale construction projects for many years, the United States has become a major private city often minor works mainly American stone coated steel roof  tiles  evolution of the market , experienced a "consumption micro" of the process to the late 1980s, the United States began turning to small and medium building construction, especially in a variety of residential construction.

CTASC released 2013 report of natural stone and artificial stone veneerchina manufacturers

 
      CTASC (Catalina Research and Ceramic Tile and Stone Consultants, Inc.) An international type of professional providing market research and business planning services, professional certification research company . CTASC release on the launch of its 2013 research report of natural and artificial stone veneer china manufacturers.
 
      Natural and artificial stone CTASC 2013 report include the following important part of its analysis of all aspects of the stone industry , channels and trends.
 
One , thanks to a recovery in the housing market Countertops demand. Countertop sales in natural and artificial stone industry all have to exceed the overall sales
Situation . Quartz stone countertops equally occupy a considerable market share. The report also analyzes the market and application of all terminals .
 
2 , granite and marble is still the most important natural stone products, materials , and its growth rate is also the largest . Artificial stone ( including man-made concrete slabs ) and engineering quartz products beyond the overall industry growth . This report analyzes the U.S. and other countries stone procurement, sale and import of the United States of stone analysis is just one single part.
 
3 , stone price grid downturn, even if the current competitive situation has improved.
 
4 , the industry's competitiveness, prices are still in the doldrums, though relatively improved during the recession . Meanwhile Stone imports increased competitive pressure by foreign suppliers to seize this recovery process to regain lost market share. The report also tracks the United States on various stone producing countries import trends .
 
5 , according to Ceramic Tile and Stone Consulting 's survey shows the importance of home decoration materials sources , the independent importers and distributors of commercial sales to other retailers and installers . CTASC survey provides sales and marketing aspects of information mainly for stone products importer and manufacturer of stone products . But can also give tile and stone installation materials and related conservation tool industries.
 
6 , residential sales are expected to result in the next five years back continues to gain sales momentum is expected to build many new housing units to meet during the recession pent-up demand for home use. CTASC report can help you plan the next five years of sales growth.edited by china faux stone veneer manufacturers

Foshan economy to a medical report, Focus "negative growth in import and export data."

Foshan concern economic analysis meeting Friday in the first half of the Foshan municipal government held a small auditorium, compared to last year's "economic winter" this year from all over the release of economic data, seems to have a little better: Regional Production GDP completed 325.921 billion yuan, up 9.5 percent, although not reach the annual target of 10%, but the gap is not large; scale industrial output value of 736.204 billion yuan, up 12.9 percent; local public finance budget revenue 21.527 billion yuan , increasing 14.24% ......

However, the world economy continued cold impact on Foshan, although a number of major economic indicators are growing steadily, but I'm a negative growth, and the bottom value in the province, is still not satisfactory. From the current situation, to promote economic development of the "Troika", import and export direct "misfiring", fixed asset investment grew nearly three years minimum, consumption growth is lower than the provincial average.

In response, Mayor Liu Yuelun that if you see a city's economic success depends not only numbers, but also to see through the digital nature of the underlying economy, "Here in the end look at our physique is fat or muscle, while violent fertilizer or sharp thin is not normal. "He believes that the economic development of Foshan power source (600,405, stock it) is a solid real economy, they see their own advantages and strengths, padded short board, can still maintain the healthy development of the economy .

faux stone wall panels

interior stone veneer panels

faux interior stone wall panels

faux rock panels interior

veneer stone panels

rock panels exterior

fake stone siding

interior rock walls

​

How to choose artificial  manufactured cultured stone veneers? 

Artificial culture stone in 2000 by the United States, South Korea's exports to China. At present, China has no specific quality standards, but it is used as the outer wall decoration materials, should be consistent with building materials, wall materials and other related aspects of the basic requirements. 


First, the artistic effect of selection (this determined by the Institute) 


Second, the intrinsic quality of products 
(A) the relevant color 
No fading? (A) the quality of the pigment (American Culture Stone and national brands have used the German "BAIER Bayer" pigment, made with cheap goods, such as "a product" and so on, the former price of the latter times) 
(2) color (pigment) is not anti-aging? --- Testing standards can refer to the "national standard exterior paint anti-aging." GB/T1865 
(3) whether the whole body colored? (American culture stone and large domestic brands are henselae coloring) 
(Two) physical indicators 
A density ≤ 1.4g/cm3 (finished weight 30kg ~ 50Kg / m.) 
2, the compressive strength load-bearing wall  china cultured manufactured stone veneers though, but there is the impact of wind, you can refer C746-1999 "concrete tile" requirement for the (unimportant). 
3, the flexural strength can JC/T641 "decorative concrete block" in the provisions of tiles or wall tiles reference GB flexural strength requirements. (Tulip culture stone average flexural strength of 27.6MPa; domestic other big brands 5.12Mpa) 
4, frost resistance can refer JC746-1999 "concrete tile" the regulations (domestic many cultural stone is by GB/T6955-1986 "ceramic tiles frost resistance test methods" for the (minus at minus 30 ℃ to 10 ℃ After 50 freeze-thaw conditions, no peeling, no breakage.). 
5, according to GB/T1865-1997 for artificial aging resistance, 150H did not change significantly. 
6, water absorption according to GB/T2579-1989 conduct (water absorption of 17%, after 2.5% protection). 
7, acid corrosion of A-level (by 0.01mol / L hydrochloric acid solution and 0.01mol / L sodium hydroxide solution was dropped after no obvious damage to the stone surface, the phenomenon of falling blocks without mortar, and restored to its original state). 
8, radioactive according to GB655 regulations (internal exposure index ≤ 0.6Bq/Kg, external exposure index ≤ 0.8Bq/Kg). 
(Three) other indicators 
1, china cultured manufactured stone veneers surface hardness (equivalent to wear). The higher, the more wind resistance, the less easy to swap ash. 
2, turning any culture stone surface alkali alkali will turn ugly. (Not 100 percent not turn base culture stone, there must be one hundred percent turn base culture stone). Concrete base is actually turned off the base, so changing the concrete structure, thus affecting the cultural life of stone. 
(Four) Description: 
Artificial culture of performance indicators reach the above criteria, mainly technical, but related: 
1, did not fully grasp the raw material formulation, the other. 
2, the material quality level is not enough (did not find a good manufacturer, supplier of information in culture stone manufacturers in a commercial secret) 
3, the production process have a problem, or do not place. edited by china stone veneer manufacturers

How to Install Stone Veneer china manufacturers

Now that you know which stone veneer product you want to use, you may be asking yourself: "How do I install stone veneer?" Don't worry! We've got you covered. Below is our step by step guide to help you learn how to install stone veneer. The following is a broad outline for installing Cast Natural Stone. For complete specifications and guidelines, please visit  www.culturedstoneveneer.com  and click on Installation Guide.

china manufactured Stone veneer Wall Installation Guide

General

Careful and proper installation is important for ensuring the long-lasting beauty of your Cast Natural Stone. For all exterior applications, required installation includes a scratch coat (also known as cement plaster coating) over a water-resistive barrier. The water-resistive barrier generally consists of two layers of properly applied Grade D paper, which is then covered with metal lath and a mortar scratch coating (cement plaster).

Installation over rigid sheathing:

The metal lath/scratch coating may be applied over structurally sound wall surfaces of plywood, OSB, concrete board or gypsum sheathing, supported by wood or steel studs, and over concrete or masonry walls.

 

Step 1: Surface Preparation

Apply two layers of Grade D weather resistant building paper or equivalent over rigid sheathing. Install from the bottom up ensuring upper layer laps lower at least four inches. Weep screeds should be installed at bottom. [Flashing, as applicable by building codes should be installed at all sill, window and other wall penetration junctures] Important, be sure that all weep screeds and flashings are installed properly.

For the metal lath, attach 2.5 lb. expanded, galvanized, metal lath to each stud 6” on center-vertically, penetrating the studs at least one inch. Be sure to attach the lath horizontally. The surface should feel rough as you rub your hand upward. Install lath with a minimum 1” overlap on horizontal and vertical seams. Lath on inside and outside corners should be wrapped completely around the corner to the next stud and attached every 6”.

NOTE: 
Before nailing down lath, be sure building paper is installed smooth. Lath needs to be tight; any bubbles should be nailed or stapled down to prevent “bounce”.

Special Note for Concrete and Masonry Surfaces: 
manufactured Stone Veneer can be installed directly to clean, unpainted or unsealed brick, concrete block or poured concrete surfaces (interior or exterior) without requiring the use of metal lath. On previously coated surfaces, sandblast or waterblast to thoroughly clean. Where thorough cleaning is not possible, install metal lath and apply a scratch coat application.

Special Note for Interior Applications: 
Same installation techniques apply, though flashing and weep screeds may not be necessary.

Step 2: Scratch Coat Application

All lathed surfaces should be covered with a 1/2” to 3/4” coat of Type N, or Type S mortar and allowed to set approximately 30 minutes prior to installing stones. Then brush with a soft bristled brush (to roughen up surface to ensure a stronger mechanical and chemical bond.). Typical mortar mix consists of one part type “N” or “S” cement and 2.25 parts sand. Mix with enough water to achieve a workable consistency. The same mortar mixture is used for scratch coating, setting the stone and grouting the joints. Dry pre-mixed mortars, especially designed for masonry, may also be used. Ask your Menards representative for specific product recommendations and mixing instructions.

Step 3: Stone Layout and Arrangement

Before stone installation, lay out a quantity near the work area. Blend multiple boxes to ensure a proper mix of size, shape, texture and color of stones allowing you to arrange the stones in the most pleasing design. Then apply stones, mixing colors randomly.

Step 4: Application

“Butter” the stone by applying an even, 1/2 inch thick layer of mortar to the back of the stone. Be sure to cover the entire back of the stone with mortar. Press the stone firmly into place so that the mortar behind the stone squeezes out on all sides. Use a wiggle action while applying the stone to insure a good bond. When applying to clean, concrete and masonry surfaces, dampened the wall prior to installation. This will aid adhesion to the existing surface. Adhesion can also be improved by adding a liquid bonding agent to the mortar mix.

Tip: Install the corner stones first starting at the bottom and working up. Install the balance of the wall from the top down. This aids in keeping the stone face clean of mortar.

Remove mortar from stone face, as necessary, during installation. Allow mortar to become “crumbly”, then remove with a trowel or brush. Do not allow mortar on stone surface to dry overnight.

When necessary, stones can be cut and shaped with a masonry hammer, masonry saw or nippers. Position cut edges away from view when possible. Trimmed edges are easily concealed at grouting.

Step 5: Grouting the Joints

After the stone has been applied to the surface, fill a grout bag with mortar and as in decorating a cake, fill the joints with mortar. Grout bags are available from your supplier. While grouting, be sure to cover any noticeable broken or cut edges with mortar.

Step 6: Striking the Joints

When the mortar joints become firm, use a wood or metal strike tool to push the mortar into any cavities or voids creating a seal around each stone. Any holes, gaps, or voids must be filled in with mortar to prevent water or pests from occupying the space. Use a tuck pointer or similar object to clean the edges of each stone to prevent cracking of the grout. Use pressure to force the mortar into the joints. This will thoroughly seal the joint edges. Be careful not to work the joints too soon. This will cause the mortar joints to smear.

Step 7: Brushing

Brush the mortar joints with a small whisk broom to smooth and clean away any loose mortar.

Do not wash off with clear water. This will result in a milky residue. Brush off any mortar spots from the face of the stone veneer. If desired, use a mild vinegar and water solution to remove any remaining mortar spots. Loose mortar and mortar spots should not be allowed to dry overnight.

Step 8: Completion

When desired, a high quality “breathable” masonry sealer can be applied on any stone veneer, especially on those exposed to severe freezing and thawing, excessive moisture, or conditions which could discolor or stain the veneer. This must be a breathable, masonry sealer. Any other type of sealer voids the warranty. Follow recommended application instructions for your selected sealer. Test several unused pieces before general application. Some sealers may alter the appearance of the masonry.

Step 9: Cleaning

During the stone application remove all mortar on the face of the stone by allowing the mortar to set-up until crumbly, then remove with a dry bristle brush. Do not allow mortar on stone surfaces to dry completely.

To remove dirt, smoke or other stains, use a mild solution of granular detergent and water. Scrub with a bristle brush and rinse with fresh water. Do not use wire brushes. Do not use acid, salt or other “de-icing” materials. They will cause damage to concrete and masonry materials. CAST NATURAL STONE is not warrantied against deterioration or discoloration caused by acid, salt or other chemical or cleaning agents.

Typical Sill & Lintel Installation

Determine Placement

Determine the height at which you would like the top of your sill or lintel. Subtract 2.5" to compensate for sill and lintel height. Snap or draw a plumb line at this height. This will give you a reference line to work from.

Fasten L Brackets

Fasten 2"x2" zinc coated angle "L" brackets so the top is flush and level with your reference line; apply 3 brackets for every sill/lintel piece to rest on. Apply 4 brackets for 48" lintel.

Mortar

Mortar the back of the sill/lintel and apply to surface allowing it to rest on the angle brackets

Caulk

Caulk the joint along the back of the sill/lintel and the building. Then cover it with flashing

Finish Stone Application

Continue installing the stone underneath the sill covering the legs of the "L" brackets. Grout and finish the joints.edited by china manufactured stone veneer manufacturers

Typical retaining wall detail.

The design of the wall system should also include the planning for the irrigation system that may be designed later by the landscape architect or engineer.china Manufactured stone veneer  should never be used below water level. Landscape architects should consider using drip water systems around stone surfaces and avoid any prolonged irrigation spray of water. All irrigation water should be directed away from stone surfaces.

Architectural china Manufactured stone veneer  can be used in parks, along roadsides and as part of a nature trail.

To prepare the surface of a concrete poured-in-place wall, the installer will sand blast or powerwash the wall until it has a sandpaper-like texture. Applying a metal lath provides the most trouble-free installation on poured-in-place walls but using a primer (dash-bond coat) may increase bonding for applications without metal lath. When installing a metal lath, the designer should specify a maximum of 6-in. x 16-in. spacing between fasteners.

Some commercial properties are combining manufactured stone veneer with a stucco finish. There are two important requirements to be met when using stone veneer with stucco. edited by  china cultured stone veneer manufacturers

Proper preparation and application of mortar to backside ofManufactured stone veneer china.

Grout color hue and the finished joint technique significantly enhance the appearance and authenticity of stonewalls. Choosing a grout that is the same color as the stonewall is usually done in more traditional designs. This type of application will create the visual appearance of a solid plane. By changing the color of the grout, the designer highlights the individual stones. There are three major types of grout techniques, all of which are common to a typical brick mason.edited by  china cultured stone veneer manufacturers

Choosing a Good Supplier of  Manufactured stone veneer from china 

Choosing a building material requires knowledge of the manufacturing process and supplier standards. When specifying manufactured stone veneer, the design professional should verify that the appropriate evaluation reports have been obtained and are available to review quality standards. There are three main evaluation services that provide third-party testing for stone veneer products. These evaluation reports are evidence that a product meets code requirements and warrants regulatory approval. The International Code Council Evaluation Services (ICC-ES), the National Evaluation Service, Inc. (NES) and Underwriters Laboratories (UL) provide reports on manufactured stone veneer. Some of the criteria tested by these services are the thermal resistance of the veneer as well as recommendations for mortar types.


The design professional should also verify that proper testing has been conducted when specifying manufactured stone veneer from china. These tests include:


Density Measurement
Compressive Strength
Tensile Measurement
Flexural Measurement
Shear Bond
Moisture Absorption
Freeze Thaw
Wind-Load
As an interior product, UL also tests stone veneer for flame spread, smoke developed, and fuel contributed as required to meet codes for interior finishes. Most manufacturers recommend stone veneer placement a distance of 16 in. to 18 in. away from any direct flame. Manufactured stone veneers that meet these testing requirements are a good finish material for interior walls including fireplace surrounds.edited by  china cultured stone veneer manufacturers

DIY: Stone Veneer Fireplace manufacturers

 

Brighten up your old brick fireplace with a new stone veneer        manufacturers china

If your old brick or masonry fireplace is looking dull, spruce it up with a new stone veneer of granite, marble or tumbled stone. While you're at it, use the new stone to create a larger hearth and mantle. Setting stone over masonry takes time and patience, but it's not a difficult job that requires extraordinary skill. Your updated stone veneer fireplace will give the room a whole new look.

Instructions
1
Measure the fireplace. Calculate how much stone veneer is required and add 10% for mistakes. Obtain the surface area by multiplying the width by the height and subtracting the hearth opening. For example, if the fireplace is 4 feet wide by 5 feet high that's 20 square feet, less the hearth opening of 5 square feet. You would need to purchase 15 square feet of veneer plus an additional 1.5 feet for errors.

 2
Mix the thin set per package directions. Trowel a thin layer of thin set over the area, filling in any indentations, gaps and grout lines of the old brick or masonry. Let dry 24 hours.

3
Check the level of the hearth with a carpenter's level. If it's not level you may have to build up where it's low with a bit of extra thin set. It's critical that the first layer of stone be level. If it's not, the mistake is magnified as you lay the stone up the fireplace.

 4
Lay out the stone on the floor in the design you would like. Stone is a natural substance and there will be variations in colors. Make sure that if there are significantly lighter or darker stones that they are randomly placed on the fireplace, rather than laid close to each other.

 5
Build a wood frame that fits in the opening of the hearth. Do this with scrap wood. The top of the frame should be 1/2 inch lower than the opening. The frame supports the stones above it until they dry. The border of stones above the opening should overhang the opening just slightly.

 6
Mix additional thin set. Butter the back of the stone with a 1/4-inch layer of thin set, spreading it to the very edges of the stone. Press the stone to the face of the fireplace starting at the bottom next to the hearth.

 7
Continue buttering the stones and pressing them onto the fireplace, moving up the fireplace front and sides. Check each layer of stones to make sure it's level. Adjust by moving the stone a bit up or down before the thin set hardens. If you want gaps between the stones, insert tile spacers between the stones.

 8
Remove the thin set from the face of the stones with stone cleaner.

 9
Seal with two coats of sealer. This is necessary to prevent the grout from sticking to the stones. Let dry 24 hours.

 10
Mix grout according to package directions. Pack the grout in between the stones. Smooth the grout into the gap with a damp sponge.
edited by china stone veneer manufacturers

July 18 opening of the International Stone Fair will invite you to ride around midsummer

July 18 opening of the International Stone Fair will invite you to ride around midsummer

Seventh Qingdao International Stone Fair will be held July 18, 2013 morning at the Qingdao International Convention and Exhibition Center grand opening.

In China Stone Association, Qingdao Municipal People's Government of Shandong Province Stone Association's strong support of the Seventh Qingdao International Stone Exhibition again achieved a breakthrough synchronization specifications and quality. 30,000 square meters of exhibition area, include stone, sheet metal, artificial stone china cultured stone siding panels, tombstone, stone veneer products, environmental decoration, stone machinery and processing equipment, maintenance materials and equipment over a hundred stone industry brands, thousands of products showcase. More distinctive north stone, richer world stone varieties, more hot stone machinery, stone care products more professional, all-round, multi-level interpretation of the global stone industry trends, to create China's stone industry forward weathervane.


It is reported that the show pre-registered visitors has more than 30,000 people, including nearly 600 international professional buyers, import and export trading company more than 350, clear to visit the real estate business, building more than 400 units. Professional, high-end visitors and buyers, rich pragmatic supporting activities will welcome stone building in northern China's stone industry trade and sourcing platform in progress.edited by  china cultured stone veneer manufacturers