Typical retaining wall detail.

The design of the wall system should also include the planning for the irrigation system that may be designed later by the landscape architect or engineer.china Manufactured stone veneer  should never be used below water level. Landscape architects should consider using drip water systems around stone surfaces and avoid any prolonged irrigation spray of water. All irrigation water should be directed away from stone surfaces.

Architectural china Manufactured stone veneer  can be used in parks, along roadsides and as part of a nature trail.

To prepare the surface of a concrete poured-in-place wall, the installer will sand blast or powerwash the wall until it has a sandpaper-like texture. Applying a metal lath provides the most trouble-free installation on poured-in-place walls but using a primer (dash-bond coat) may increase bonding for applications without metal lath. When installing a metal lath, the designer should specify a maximum of 6-in. x 16-in. spacing between fasteners.

Some commercial properties are combining manufactured stone veneer with a stucco finish. There are two important requirements to be met when using stone veneer with stucco. edited by  china cultured stone veneer manufacturers