stone veneer china manufacturers  classification and how to choose



Some of the home decoration also used stone, the stone is made of natural stone or artificial stone good good? Natural stone and what classification and how to choose it? Xiaobian for everyone in this brief introduction.

First, the classification of stone

   Stone into natural stone and artificial stone veneer, natural stone by geological classification method is divided into igneous rocks, sedimentary and metamorphic rocks three categories; artificial stone artificial stone is divided into cement type, polyester artificial stone, artificial stone and composite sintered artificial stone.


Second, the technical nature of the stone:

A compressive strength. Non-homogeneous and anisotropic brittle materials. The standard test method specified in the standard specimen was measured average compressive strength of stone, the stone intensity is divided into nine levels.

(2) Apparent density. With stone mineral composition and porosity related, according to the apparent density can be divided into light and heavy stone stone two categories.

3 water resistance. Stone softened water resistance coefficient values according to their size into three classes, namely:

Stone high water resistance: softening coefficient greater than 0.9;

The water resistance of stone: softening coefficient between 0.7 --- 0.9;

Low water resistance of stone: softening coefficient between 0.6 --- 0.7

4 absorbency. Stone reduced strength after water absorption, frost resistance variation, increased thermal conductivity, water resistance and durability. The apparent density of the stone, small porosity, water absorption is also small.
5 frost resistance. Frost resistance and water absorption stone size are closely related. Generally large stone water absorption, frost resistance is poor. In addition, frost resistance but also with stone water saturation, freezing and thawing times relevant degree. Stone in the water saturation, the required number of freeze-thaw cycles, and the absence of weight loss through the seam does not exceed 5% strength loss does not exceed 25%, compared with antifreeze qualified. edited by stone veneer china manufacturers

2014 Shanghai Building Materials Exhibition heavy attack

- Brings together industry leading brands interpret fashion design trend

International Building Decoration Fair (Expo Build China 2014, referred to as "2014 Shanghai Building Materials Exhibition") 2014 March 31-April 3 at the Shanghai New International Expo Centre. Exhibition jointly organized by the China International Building year Ceramics & Sanitary Ware Exhibition, China (Shanghai) International Hotel and Architectural Lighting Exhibition, Shanghai International Hotel Supplies Exhibition and other industry events, together constitute the world's large building and hotel exhibition series - HDD (Hotel + Design & Deco) Fair for luxury villas, hotels and restaurants, shopping malls and clubs and other high-end property from design, construction, renovation to the operational integration solutions.
  china stone veneer manufacturer
Shanghai Building Materials Exhibition, the exhibition site
Shanghai real estate investment total heights, leading building materials market rebound
According to Jones Lang LaSalle in July released the latest report, the first half of Shanghai real estate investment market trading volume (more than $ 5 million worth of office, retail, industrial and hotel assets total transaction amount) has more than 20 billion yuan, exceeding the North, Guangzhou, Shenzhen and other cities, as the first in the country. Only the first half of the Shanghai investment market trading volume has accounted in 2012 for 80% of the total annual transaction. In the real estate market rebound, driven home building materials market is gradually warming. Data show that the national-scale home building materials stores in 2013 January-February total sales of 141.1 billion yuan, up 7.11 percent, home building materials market boom showed a rapid rising trend. Shanghai as the country's consumption of building materials market benchmark, to seize Shanghai and East China market will enhance the international influence of building materials enterprises and brand radiation.edited by china cultured stone siding panels

First China (Kashgar) International Building Materials Fair successfully held

June 28-July 2, 2009, by the Guangdong Building Decoration Materials Industry Association, China hosted the first lead (Kashi) International Building and Decoration Materials Fair successfully held in Kashi, marking the Guangdong Building Materials Yuanjiang achieved initial victory.

It is understood that the exposition, Guangdong Building Materials Yuanjiang important project. By the Guangzhou Municipal People's Government, Kashi prefecture, Xinjiang Uygur Autonomous Region Department of Commerce organized, Guangdong Building Decoration Materials Industry Association, People's Government of Shufu County, Kashi Shufu Guangzhou International Trade City Limited has undertaken. In Kashgar, Guangzhou Metro, Guangdong Jian Bo main venues to "Guangdong Building Materials, the world building" as its theme, is "the first Kashgar Fair" and the "Ninth Caledonia Fair," the building main venue.
Exhibition attracted nearly 300 famous manufacturers in Guangdong, more than 10,000 varieties of exhibitors, exhibition area of 50,000 square meters, covering building materials, furniture, lighting and other various categories. And give full play to advantages of industrial clusters in Guangdong, Foshan ceramics to create a boutique area, bathroom plumbing District, Jiangmen, Dongguan Famous Furniture Area, Guzhen International Lighting Museum, Shunde famous paint shop, South Street, featuring an aluminum formats. Representative exhibitors new Pearl Ceramics Group, Mona Lisa Ceramics Group, Jianmei Aluminum Group, Albert Aluminum Group, China Paint, paint the big treasure, male plastic pipes, Qiaodeng bathroom, Allston appliances, Boston lighting, natural flooring, new sunlight stone coated metal roof tile , RG china cultured stone siding panels.

And so on. Or conclude a contract signed during the exhibition, intention of the project 3463, contract, the amount of 41.07 million yuan intention, field sales amount of 33.85 million yuan.edited by china stone veneer manufacturer

2013 of artificial china stone veneer industry will usher in rapid development

2013 of artificial china stone veneer industry will usher in rapid development

 
 
 
Today, artificial stone market is growing very rapidly, to get the real estate, home cabinets, decorative building materials and other industries alike. Meanwhile, the development of china artificial stone veneer industry  also benefited from China artificial stone and quartz stone manufacturing industry continues to in-depth study and strong inclusive capabilities, products quickly spread wider broader market segment.

In addition to being the real estate control policies related effects, the global economy showed deserted situation, exposure to cold environment, surrounded by a large, artificial stone veneer and quartz stone sales and the development of contrast, there has been more or less lag.
2013 With the artificial stone and quartz stone manufacturing technology continues to mature, advanced production equipment and self-energy of the operating system, its artificial stone products in the market, the advantage is more outstanding, present, China's building materials industry has been further specification in real estate and other factors, the traditional building materials industry has been a great shock, artificial stone industry is likely to face re-shuffle of the situation, but for the artificial stone industry opportunities. If you can say that the artificial stone industry a good grasp this opportunity, it will usher in a golden period of development.edited by china cultured stone siding panels

BIG ROCK STONE VENEER & GARDEN PRODUCTS

BIG ROCK STONE VENEER & GARDEN PRODUCTS 





   

What is Big Rock Stone Veneer?
Is it Real, or is it Big Rock?
Stone veneer is a lightweight cast rock facing, virtually impossible to distinguish from natural stone.  The cast veneer is an exact copy of the original Hawaiian natural stones and consists of the same basic ingredients as natural stone.  

The stone veneer is cast in molds, using a formulation of Portland cement, lightweight volcanic aggregates, and mineral oxide pigments.  
Big Rock stone veneer Manufacturer in china

New to our line:  Ulupalakua (from Maui), Blue Rock, Cut Basalt Stone.
The veneer is palletized: ‘flats’ at 200 sq. ft. and ‘corner-pieces’ at 150 linear feet per pallet.
We fill your order according to your needs.  It is not necessary to order by the pallet, or by the box as with other companies.  Whether you need two square feet or a thousand, you get what you want!
The veneers average approximately 2 inches in thickness and weigh 4 to 6 pounds per sq. ft.
Including the 3/4" mortar bed to set the veneer, you will add approximately 2.5" - 3" to the wall.
The lightweight properties of Big Rock Stone Veneer allow for quick and easy installation.
No structural modifications or wall ties are required for the installation of Big Rock Veneer.
It is easily applied to all interior or exterior wall surfaces with the use sand and mortar
Veneer is available in both ‘flats’ (for flat areas) & ‘corner-pieces’  (for outside returns)

 

Why use Big Rock Stone Veneer?
The lightweight quality of Big Rock Stone Veneer allows for quick and easy installation, with no structural modifications, or wall ties required. 
Using stone veneer saves both time and money.  Labor costs are less than they would be with real rock, as the installation time is reduced. 
Stone veneer does not require the expensive, heavy equipment needed to move and to place natural stone. 
Veneer can be applied to any wall surface.
Unpainted concrete surfaces such as tile, cast-in-place concrete, and cement board require no surface preparation and the stone is applied directly to the wall with mortar. 
Painted concrete and metal require the application of galvanized expanded metal lath before the scratch coat, and mortar. 
Interior wood, drywall etc. need only metal lath, whereas exterior wood requires a waterproof vapor barrier, the metal lath, and then the mortar and the veneer. edited by china stone veneer manufacturer
 
 
 
 

 

RG Cultured Stone veneer Direct Advantage

RG Cultured Stone  veneer  Direct  Advantage


Through the training and management of the sales team with extensive product knowledge continuously, familiar process, improve marketing skills, and fully carry out academic public relations work, the various product features the perfect combination with the real needs of customers, market development success rate, brand building and promotion effect, brand value appreciation significantly enlarged.

       
         As customers demand for cultural diversity and stone species differences, making the production process complexity, die variety, color stability control difficulty, a single product capacity has been greatly restricted, while the progress of complex customer projects, easy resulting in production out of touch with the progress of the project.


         Direct sales force is conducive to master project schedule, whereby real-time adjustment of production and delivery schedules, rational allocation of production resources. The introduction of a specific project intermediary force, the target of strong, good effect, is a strong complement direct sales force, while avoiding the area under the distribution models overall development on the regional market barriers unfavorable factors, and lower cost than the broker intermediary costs. High professionalism of the sales force to provide customers with full operation of the project advisory services to enhance value-added services. edited by china stone veneer manufacturer

Chinese stone veneer enterprises in international competition, their attention to the problem

Chinese stone veneer enterprises in international competition, their attention to the problem

 
 
 
As far as we participate in international market competition and experience, Chinese stone enterprises in international competition own attention to the problem can be summarized as the following three points:
First, the concept of internationalization:
   Second, pay attention to quality, brand, not simply to compete on price;
   Third, the other big difference with the high value-added product development.
Q: Although China's stone veneer  industry in the international has a very important position, but on the Chinese stone industry itself, there are still many problems affecting the process of internationalization. Do you think the main problem is what? China's enterprises should be how to deal with stone and add fat to solve?
Mr Lai Guoxiang: Xiamen stone industry on the current point of view, these problems are mainly reflected in the following two points:
First, the stone veneer  industry overall specification of the poor, there is a serious disorderly competition. This is mainly for the product structural imbalances, lack of brand-name products, the export level is not high, the industry protection awareness is poor, price competition is fierce. Currently, the majority of SMEs on the stone market, product and the lack of differentiation, stone products and the awareness is weak, imitate each other, vicious price competition in serious condition, affecting the overall image of Chinese stone industry.
Second, stone technology R & D investment is not enough. Stone processing is not the traditional sense of the labor-intensive industries, but labor technology-intensive industries. At present, many domestic small business technology and equipment behind the stone, the stone exploitation and utilization of resources are wasted in the process is still in extensive plus level, stone sophisticated technical personnel as well as some aspects of new product technologies lack of strength, did not form well-known brands, quality stone products not improved.
These require managers to change business concept and business model talent, technology and equipment, increase the technological content of products, to mention the added value through product differentiation to resolve the vicious price competition, providing the market with more diverse products, affinity for the stone veneer  industry to create new market space and the value-added space. Meanwhile, the proposal by the government stepped down, through industry associations to develop industry standards, to strengthen inter-enterprise communication, establishment of corporate consumption profile, promotion and major exporting countries unemployed Association Exchange, through a variety of ways standardize enterprise behavior.
Because some, we should expand and strengthen cooperation with the world's leading Stone Group cooperation and learn from their advanced technology and management practices, accelerate the implementation of technological innovation and management innovation, and strive stone among the world's industrial development starting line, closely followed on world stone industry progress. The only way they can in the world stone industry in the development of a place.edited by china stone veneer manufacturer

Marble, culture stone price increases there is space

Marble, culture stone price increases there is space

Stone including marble, granite, culture stone veneer, culture stone culture stone also includes natural and artificial culture stone two kinds. Various types of stone for its color, and texture of different production processes, there is a big price difference, but a large marble decorative plates hidden price upside.

Culturde stone veneer  used for local interior decoration
Cultured stone veneer  modeling diverse, different colors, and more for local indoor decoration, such as living room TV wall decor, wrought iron heating cover embossed around the shape, or in the courtyard of the ground handling, decorative effect close to nature, reflecting the ancient decorative style. Artificial culture stone which is made from natural stone scrap reprocessed made of lighter weight, with a non-toxic, no mold, easy installation, suitable as wall local processing to reduce the wall of the loading capacity, prices are more natural culture stone expensive, by the joint venture brand manufacturers, prices generally at 300 yuan / square meter or more, if it is imported stone brand, price will be higher, up to 1000 yuan / square meters. The natural culture stone much cheaper, the price is generally 120-130 yuan / square meters. Consumers can choose according to their economic capacity and the need to purchase.
Marble color determines the price
Marble has always been a fine texture

Building before April of this year exports of goods increased by 22% at 09:45 on June 5, 2013

Building before April of this year exports of goods increased by 22% at 09:45 on June 5, 2013

www.culturedstoneveneer.com

Source: Ministry of Industry website
2013 January to April, building materials merchandise exports $ 8.86 billion, an increase of 22.3 percent, an acceleration of 11.5 percentage points compared with the first quarter of this year, the growth rate dropped 2 percentage points. Building and sanitary ceramics, building stone, architectural and technical glass, cement products and cement and cement clinker and other major export commodities were maintained at more than 15% growth in glass fiber and products exports declined slightly.

Lack of effective demand in foreign countries, international trade protectionism, market competition and other adverse conditions, building materials export enterprises to increase innovation and research and development efforts to enhance competitiveness, actively explore the international market. From this year, the growth of merchandise exports building trend, compared to last year the growth rate is accelerating exports increased steadily. edited by stone coated steel roofing tiles