BIG ROCK STONE VENEER & GARDEN PRODUCTS

BIG ROCK STONE VENEER & GARDEN PRODUCTS 





   

What is Big Rock Stone Veneer?
Is it Real, or is it Big Rock?
Stone veneer is a lightweight cast rock facing, virtually impossible to distinguish from natural stone.  The cast veneer is an exact copy of the original Hawaiian natural stones and consists of the same basic ingredients as natural stone.  

The stone veneer is cast in molds, using a formulation of Portland cement, lightweight volcanic aggregates, and mineral oxide pigments.  
Big Rock stone veneer Manufacturer in china

New to our line:  Ulupalakua (from Maui), Blue Rock, Cut Basalt Stone.
The veneer is palletized: ‘flats’ at 200 sq. ft. and ‘corner-pieces’ at 150 linear feet per pallet.
We fill your order according to your needs.  It is not necessary to order by the pallet, or by the box as with other companies.  Whether you need two square feet or a thousand, you get what you want!
The veneers average approximately 2 inches in thickness and weigh 4 to 6 pounds per sq. ft.
Including the 3/4" mortar bed to set the veneer, you will add approximately 2.5" - 3" to the wall.
The lightweight properties of Big Rock Stone Veneer allow for quick and easy installation.
No structural modifications or wall ties are required for the installation of Big Rock Veneer.
It is easily applied to all interior or exterior wall surfaces with the use sand and mortar
Veneer is available in both ‘flats’ (for flat areas) & ‘corner-pieces’  (for outside returns)

 

Why use Big Rock Stone Veneer?
The lightweight quality of Big Rock Stone Veneer allows for quick and easy installation, with no structural modifications, or wall ties required. 
Using stone veneer saves both time and money.  Labor costs are less than they would be with real rock, as the installation time is reduced. 
Stone veneer does not require the expensive, heavy equipment needed to move and to place natural stone. 
Veneer can be applied to any wall surface.
Unpainted concrete surfaces such as tile, cast-in-place concrete, and cement board require no surface preparation and the stone is applied directly to the wall with mortar. 
Painted concrete and metal require the application of galvanized expanded metal lath before the scratch coat, and mortar. 
Interior wood, drywall etc. need only metal lath, whereas exterior wood requires a waterproof vapor barrier, the metal lath, and then the mortar and the veneer. edited by china stone veneer manufacturer